GFUVE three phase AC current clamp P50 inner diameter 50mm 1000A
In electrical and electronic engineering, a CT Sensor is an
electrical device having jaws which open to allow clamping around
an electrical conductor. This allows measurement of the current in
a conductor without the need to make physical contact with it.
Clamp On Current Transformer P50 features 50 mm jaw size and high
linearity. It is a current sensor which can measure 0-1200A cable.
Product comes with a year warranty.
GFUVE P50 Series of Clamp-On Current Transformer's are designed for
fast and easy installation. Clamp-On CT uses Permalloy Magnetic
Core or Silicon Amorphous Core, with characteristics of small size.
high precision, good stability and strong anti-interference
ability.
Clamp-on Current Transformer Current Clamp is a high-precision AC
current converter, and can meet a variety of measuring instruments,
It can be used along with many kinds of instruments and devices,
such as energy meter spot calibrator, multifunctional meter,
oscilloscope, digital multimeter, dual clamp Ground resistance
tester, dual clamp phase volt ammeter.
Clamp on current transformers are used for long term energy studies
which includes electric power quality monitoring device. It is
ideal for power and energy measurement.
Applications
Electric energy meter calibrator (on site)
Double clamp type ground resistance tester
Double clamp type phase volt-ampere meter
Digital multi-meter
Multi-function energy meter
Power quality analyzer
Matched instruments
Calibration instrument on site
Features
Suitable for 1000A cable online measurement.Holding wire diameter:
φ50mm
Dimension: 101mm×219mm×26mm
Load capacity: mA output≤4Ω, 1A output 0.1Ω, 5A output 2.5VA
Installation: clamp type
Output mode: lead output
Parameter
| Electrical parameters |
| Ratio | 1000: 1 or 2000:1 (customized) |
| Accuracy class | 0.1%, 0.2%, 0.5% |
| Primary current | 0 - 1000A AC |
| Secondary current | 0 - 5A AC (customized) |
| Max. Cont. Input current | 1200A |
| Over voltage category | CAT III 600V |
| Output signal | 500mA,1A,5A AC at nominal input current |
| Frequency range | 40Hz-2000Hz |
| Dielectric strength | 3KV 50Hz/60Hz at 1 minute |
| Temperature range | -20°C to +55°C |
| Output | 2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors | 600 V |
| Standard | EN 61010-1, EN 61010-2-032, IEC60044-1 |
| Installation | Clamp type |
| Output mode | Lead output (2.5m) |
| Mechanical parameters |
| Dimensions (L x W x H) (mm) | 102.9 x 219.6 x 28 |
| Weight (g) | 550 |
| Holding wire diameter (mm) | φ50 |
| Max. jaw opening (mm) | 50 |
| Jaw color | Blue |
| Material | PC+ABS+Polycarbonate, UL94 V0 |
Photos
