LMCK185-10 2000A /5A 0.5s IEC60044-1 IP67 Outdoor split core current
transformer manufacturers
Outdoor current transformers are applicable for AC power system
35kV and measurement of current of power supply equipment below
10KV also can be used for microcomputer protection. This Type is
flame retardance anti-moisture, stable performance, no maintenance.
GFUVE Electronics is a professional manufacturer in China devoted
in research ,design ,and production of Split Core Current
Transformers(SCT) , Rogowski Coils,Split Core (Clip on ) Current
Sensor ,Split Core Current Transducer ,High precision current
transformer ,and mini voltage transformer .Measure AC current from
1A to 5000A, Output can be 333mV ,mA ,1A and 5A .UL,CE approved.
LMCK series outdoor current transformers are applicable for AC
power system 35kV and measurement of current of power supply
equipment below 10KV also can be used for microcomputer protection.
This type of current transformer employs imported silicon steel
which with high permeability as magnetic material, has the
characteristics of Small magnetic circuit loss and can be split,
its semicircular core and secondary windings employ high quality
epoxy resin vacuum, casting in plastic-case (ABS&PC) which is
flame retardance anti-moisture, stable performance, no maintenance.
Split Core ( Clip-On ) Current Transformer Split Core (Clip-On)
Outdoor Current Transformer Clamp-On Weather Proof Rogowski Coil
Primary Clip-On Current Transformer Rogowski Coils for Smart Meters
Rogowski Coils Three Phase Current Transformer (Motor & Inverter
Control) High Precision Current Transformer Zero Phase Current
Transformer Ground Fault Current Transformer Three Phase Current
Transformer.
Parameters
| Technical parameters | |
| Standards | IEC60044-1; IEC 61869-2; NTC 2205; GB1208-2006 |
| Accuracy Class | 0.5%, 1% |
| Range of primary rated current | 300-5000A |
| Range of Rated load | ≤25VA |
| Technical parameters - continued | |
| Rated frequency | 50/60Hz |
| Rated secondary current | 5A or 1A |
| Secondary winding power frequency withstand voltage | 3kV, 1min |
| Safety Factor Rating | (FS) <5 |
| Flame retardant ABS plastic shell inside, jaw waterproof apron. |
| Mechanical parameters | |
| Aperture (mm) | Φ185 |
| Dimensions (W×D×H) (mm) | 350×283×55 |
| Weight (kg) | 4.5 |
| Working conditions | |
| Operating temperature | -35°C to +55°C, not exceeding +40°C |
| Environment | outdoors or indoors |
| The height of above sea level | 0- 3000m |
| Conditions | No existence of severely begrimed, erosive and radioactive gas in
the air. Continuous working under the rated current is allowed. |
Compare Datasheet
| Model | Primary rated current | Rated load | Aperture (mm) | Description
(mm) | Weight (kg) | Material | Water-proof |
| LZCK-55 | 100-1500A | ≤10VA | φ55 | 180×138×52 | 2 | PC | IP65 |
| LMCK185-10 | 300-5000A | ≤25VA | φ185 | 350×283×55 | 4.5 | PC | IP65 |
| LZCK310-10 | 300-600A | ≤10VA | φ50 | φ50 x φ110 x 32 | 1 | Resin | silicon case (option) |
| LZCK322-10 | 30-600A | ≤10VA | φ50 | φ50 x φ110 x 52 | 1.6 | Resin | silicon case (option) |
| LZCK350-10 | 20-600A | ≤25VA | φ50 | φ50 x φ110 x 105 | 3.1 | Resin | silicon case (option) |
| LZCG530-10 | 30-600A | ≤20VA | φ45 | φ45 x φ120 x 65 | 2.1 | Resin | silicon case (option) |
The Product Picture:
